UNIVERSAL SIGHT PUSH TOOL PURSHER FOR HANDGUNS PISTOLS FRONT OR REAR 1911, GLOCK, ETC… (ALL BLOCKS INCLUDED)

4 sets of interchangeable grip inserts: A) Grip inserts with straight sides for Glocks, 1911, and similar. B) Grip inserts with stepped sides for XD, XDS, XDM, and others with stepped sides. C) Grip inserts with notches for Beretta, Colts, 92 and others with slide safetys and/or decockers D) Grip inserts with angled sides designed for all handguns that have angled sides
High End 8160 steel base, 6160 aluminum grip inserts, and stainless steel hardware ensure this product will not corrode and give you a lifetime of dedicated service
Sylvan Arms 4th generation Sight Tool is the most versatile and robust on the market.

Sylvan Arms Largest and most advanced sight pusher tool used to be designed for professional use. Made from hardened 8 There are lots of videos on youtube showing how to use this tool. 1. First things first, take a look at your pistol and then look at the sight and see if you wish to have the angled side, or the straight side of the pusher block. Please Needless to say to only use the head end of the bolt and push the sight towards the solid jaw, you must not be pushing towards your thumbscrew. If necessary, You can also want to pull the nut and flip the pusher block around the opposite direction to have the proper orientation. 2. Now, even if it’s not at all times necessary, it is strongly recommended that you do remove slide from pistol. 3. Use included material or cut a small pc of business card for use as a protective strip. Make sure the material has sufficient friction coefficient to avoid any sliding against the blocks. 4. Use oil for guns on the threads of the tool and oil the sight for smooth and fluid movements. 5. Now you’ll fix the slide and shim as needed with thin washers so that it is lined up to push at the bottom of the sight. Needless to say not to push on the upper blade area. 6. Now you’ll hand tighten thumb screw to protected slide, Needless to say you are not looking for alot of torque. 7. Take a step back and do a double check to ensure everything is lined up properly. You can also wish to us cushioning material like business card or a cleaning patch between the pusher and the sight so the sight does not get scratched. 8. Use wrench to slowly turn the bolt head as required for adjustment, the sight will move into alignment. Please remember that 10lbs of torque on a 6″ wrench is the same as 1000lbs of torque pushing the sight. 9. When it comes to a stuck sight that does not move do not force it. It is important to soak the slide in gun oil overnight or 48hrs to loosen it up. If it still doesn’t move with reasonably strong pressure then we recommend to take it to a gun smith or a manufacturers service center.
4 sets of interchangeable grip inserts: A) Grip inserts with straight sides for Glocks, 1911, and similar. B) Grip inserts with stepped sides for XD, XDS, XDM, and others with stepped sides. C) Grip inserts with notches for Beretta, Colts, 92 and others with slide safetys and/or decockers D) Grip inserts with angled sides designed for all handguns that have angled sides
High End 8160 steel base, 6160 aluminum grip inserts, and stainless steel hardware ensure this product will not corrode and come up with a lifetime of dedicated service
Sylvan Arms 4th generation Sight Tool is the most versatile and robust available on the market.
The problem with most sight pusher tools available on the market is that they don’t fit all handguns. The SPT-24 is the 4th generation of sight pusher tools with 11 interchangeable blocks and almost infinite configurations ensuring that this amazing tool will work with almost any pistol with dovetail sights available on the market including glock, 1911, sig, colt, beretta, wesson, luber, ruger, and so forth, and so forth… too many to list….

Reviews

There are no reviews yet.

Be the first to review “UNIVERSAL SIGHT PUSH TOOL PURSHER FOR HANDGUNS PISTOLS FRONT OR REAR 1911, GLOCK, ETC… (ALL BLOCKS INCLUDED)”

Your email address will not be published. Required fields are marked *