Armasight CO-Mini HD MG Gen 2+ Night Vision High Definition Clip-On System with Manual Gain

Manual gain control
Simple and quick conversion of daytime scope to night vision
Mounts in front of any daytime scope with no rezeroing required

DESCRIPTION:

Designed for short-to-medium ranges, the Armasight CO-Mini HD MG is essentially the most compact commercially to be had Clip-On Night Vision Device. The CO-Mini HD MG uses image intensification technology and is designed to convert so much low-to-mid power daytime sights, scopes, or binoculars to operate at night. The CO-Mini HD will also be mounted in seconds and without tools. It may be attached in front of a day rifle scope (the use of its quick release Picatinny mount) or straight away onto the day scope (or binocular/telescope) objective lens with an optional adapter. CO-Mini is suitable to be used with so much commercial and military specification day time sights, telescopes or binoculars (as much as 6X magnification). Since the CO-Mini HD MG is mounted in front of your personal day scope, the shooters eye relief isn’t altered, and shot release and follow through all remain intuitive. The clip-on device is factory bore-sighted to raised than 1 MOA accuracy, so no alteration in zero is experienced. The Armasight CO-Mini HD is intended primarily to be used by essentially the most demanding hunter or short range assaulter, where field of view and ease of use is more vital than high magnification. Packed with innovative and vital features – bright light shut-off, wireless remote Keep watch over are only some – the ArmasightCO-Mini HD is designed to make quick intuitive shooting just as easy at night as it’s all the way through the day. Whether your day scope is a well known brand or no longer, the Armasight CO-Mini HD MG will work just as well at magnifications 2-6X. The Armasight CO-Mini HD MG utilizes a High Definition Gen 2+ image tube with manual gain providing resolution of 55-72 lp/mm. The CO-Mini brings prime quality clip-on night vision within everyone’s achieve.

FEATURES:

  • Simple and quick conversion of daytime scope, sight or binoculars to Night Vision
  • Mounts in front of rifle scope without a re-zeroing required
  • Equipped with Wireless Remote Control
  • Manual Gain Keep watch over
  • Powered by a single alkaline 1.5V AA or 3V CR123A lithium battery
  • Low Battery Indicator
  • Quick Release Mount
  • Bright Light Cut-off System
  • Mil Same old Compliant
  • Limited Two-Year Warranty

SPECIFICATION:

  • IIT Generation Gen 2+ HD MG
  • Resolution 55-72 lp/mm
  • Magnification 1x (designed for the use of with as much as 6x day time optics)
  • Exit Pupil Diameter, mm 27.5
  • Lens System F1:1.26, 38mm
  • FOV 22°
  • Range of Center of attention 20 m to infinity
  • Diopter Adjustment No
  • Controls Direct
  • Manual Gain Keep watch over Yes
  • Bright Light Cut-off Yes
  • Infrared Illuminator Detachable Long Range IR Illuminator
  • Power Supply 1 x 1.5V AA type battery or 1 x 3V CR123A type battery
  • Battery Life 60h ( 3 V ) / 40h (1. 5 V )
  • Environmental Rating Water and Fog-Resistant / Water resistant (optional)
  • MIL-STD-810 Yes
  • Operating Temperature -51°C to +49 °C
  • Storage Temperature -51°C to +49 °C
  • Dimensions 125 x 68 x 55 mm / 4.9 x 2.7 x 2.2 in
  • Weight 0.48 kg / 1.06 lbs
  • Warranty 2 years

Manual gain Keep watch over
Simple and quick conversion of daytime scope to nighttime vision
Mounts in front of any daytime scope without a rezeroing required
Powered by a single alkaline 1.5V AA or 3V CR123A lithium battery
Export Restriction By adding to cart I agree that I don’t intend to export this product outdoor of america

Reviews

There are no reviews yet.

Be the first to review “Armasight CO-Mini HD MG Gen 2+ Night Vision High Definition Clip-On System with Manual Gain”

Your email address will not be published. Required fields are marked *