Aimpoint H-1 4 MOA Micro Sight

Compact aiming system provides performance of full-sized sights in small package; weighs less than four ounces, including integrated mount
Can be used on any type of firearm or archery equipment, including rifles, bows, hunting revolvers, and bows
Lightweight sight weighs less than four ounces including integrated mount, and can be easily “piggybacked” on top of larger magnifying scopes optics

It doesn’t matter what your mission, the size and weight of your equipment is a critical factor. With the Aimpoint Micro H-1, Aimpoint has introduced an aiming system that provides the performance of full-sized sights in the smallest package conceivable. Designed with the hunter in mind, these sights are the lightest red dot sights tough enough to bear the Aimpoint name. Small enough to be used anywhere that you should put iron sights, these sights Can be utilized on any form of firearm or archery equipment. A lightweight rifle with Micro H-1 mounted on it remains a lightweight rifle. A hunting revolver with a Micro H-1 installed remains as easy to carry as with iron sights and is much quicker to aim. On a bow, the parallax-free Micro H-1 gets rid of the need for a peep, allowing you to shoot appropriately in lower light. Built to offer the same battle-proven ruggedness as other Aimpoint products, the Micro H-1 is in a position to perform under extreme conditions even as adding negligible weight to your weapon. Suitable to be used on rifles, carbines, shotguns, and handguns, the Aimpoint Micro H-1 is ideal as a stand-by myself sight, and because it weighs not up to 4 ounces including the integrated Weaver mount, it may easily be “piggybacked” on top of larger magnifying scopes optics. Aimpoint’s unique band-pass coating at the front lens gives the highest conceivable dot brightness, even as providing the clearest, brightest image conceivable. Features 13 brightness settings to be used in daylight and low-light conditions, so the Micro H-1 is able to be used around the clock. Unique Features of the Micro H-1: Ideal for rifles, carbines, shotguns, and handguns – Integral – Patent pending mount is keyed to the sight body to soak up recoil. New ACET technology allows 50,000 hours (over 5 years) of constant operation from one battery – 4 MOA dot – Matte Black finish – Submersible to 15 feet (5 meters) – Top of protective caps fits into holes on adjustment screws– no other tool required.

On a bow, the parallax-free H-1 Micro gets rid of the need for a peep, allowing you to shoot appropriately in lower light.

With the Micro H-1, Aimpoint has introduced an aiming system that provides the performance of full-sized sights in the smallest package conceivable. Designed with the hunter in mind, this sight Can be utilized on any form of firearm or archery equipment, including rifles, bows, hunting revolvers, and bows. The compact, lightweight sight weighs not up to four ounces including the integrated mount, and will also be easily piggybacked on top of larger magnifying scopes optics. Aimpoint’s unique band-pass coating at the front lens provides optimal dot brightness, in addition to clear, crisp images.

Features

  • Parallax-free with unlimited field of view and eye relief
  • Rugged, durable construction, unaffected by extreme conditions
  • No harmful laser emissions
  • Mechanical switch for speed and reliability
  • Lightweight at only 84 grams without mount and 105 grams with
  • Integral Weaver-style base allows easy attachment
  • ACET technology allows 50,000 hours of operation on one battery
  • Available in four MOA (minutes of angle)
  • Patent pending mount is keyed to the sight body to soak up recoil
  • Precision adjustment for windage and elevation
  • Top of protective caps fits into holes on adjustment screws; no other tool required
  • 12 settings to be used in daylight and low light conditions

Optical Data:

  • LED light source
  • 650nm red light
  • Anti-reflex coating on all surfaces and multi-layer coating objective lens
  • 1X magnification

Electronic Data:

  • Runs on one three-volt lithium battery (type CR2032)
  • Approximately 50,000 hours of battery life, or five years of continuous use
  • Manual rotary switch dot intensity adjustment
  • 12 DL daylight settings

Mechanical Data:

  • High strength extruded aluminum housing
  • Hard anodized matte finish
  • One-click adjustment; 0.5-inch at 100 yards
  • Integrated Picatinny/Weaver mounting

Environmental Data:

  • -20 to 140 degrees Fahrenheit operating temperature range
  • Fully waterproof

Dimensions:

  • Sight measures 1.6 by 1.4 by 2.4 inches (W x H x D)
  • Measures 2.4 by 1.6 by 2.4 inches (W x H x D) with mount
  • Sight weighs three ounces
  • Weighs 3.7 ounces with integrated mount

Warranty
Aimpoint products include limited manufacturer’s warranties of two years for professional or competitive use, and ten years for personal or recreational use.

About Aimpoint
In 1974, a small group of Swedish entrepreneurs began exploring how you can fortify shooting accuracy, with the deceptively simple goal of creating a sighting technology that would allow shooters to acquire their target quickly, and hit moving targets in all weather and lighting conditions consistently and appropriately. The results of their efforts, the now ubiquitous red dot sight, would ultimately revolutionize the shooting and hunting industry.

The company’s first commercial sight product, the Aimpoint Electronic, used to be introduced in 1975, and quickly developed a reputation as some of the fastest way to aim a firearm. The Aimpoint red dot sight has continued to evolve during the last 35 years by working closely with experienced hunters, marksmen and military weapon experts, and there are multiple million Aimpoint red dot sights in use around the world nowadays.
Compact aiming system provides performance of full-sized sights in small package; weighs not up to four ounces, including integrated mount
Can be utilized on any form of firearm or archery equipment, including rifles, bows, hunting revolvers, and bows
Lightweight sight weighs not up to four ounces including integrated mount, and will also be easily “piggybacked” on top of larger magnifying scopes optics
Unique band-pass coating on front lens provides optimal dot brightness, in addition to clear, crisp images
Includes limited manufacturer’s warranties of two years for professional or competitive use, and ten years for personal or recreational use

Reviews

There are no reviews yet.

Be the first to review “Aimpoint H-1 4 MOA Micro Sight”

Your email address will not be published. Required fields are marked *